Knowledge requests — Buildings › Unit sizes
Homes with no square footage on file, by building and layout; other homes' sizes as reference only; Save fills only what is missing
23 Oct 2026 · branch feat/knowledge-requests-unit-sizes · captured against propflow-stage · at bfae719c8b8
Data note. Every name and balance below comes from propflow-stage, which is anonymized by construction (ADR-0097/0110 — phones in the impossible +1000 NPA, emails @example.test). The identical capture against prod would carry real tenants' names and balances and is not safe to attach anywhere, which is why the generator refuses to run against one.
1 · Desktop: the Unit sizes card under the deposit
Each building with unsized homes lists them by layout. The grey line is a reference from other homes of the same layout there; nothing is filled in from it. The count at the top stays at three Buildings items: unit sizes is not counted.
Asserted in the captured DOM — Unit sizes · These homes have no square footage on file · Use for all · homes here: · of 3 answered. The card, its reference line and the unchanged count are all on screen.
Sections 2–3 and notes
2 · "Use for all" fills a layout's empty boxes as a draft
A size typed in the first box, then Use for all: the layout's other empty boxes take it. Nothing is saved until Save (not pressed here).
Asserted in the captured DOM — Unit sizes
3 · Phone width
The boxes fall to two per row; nothing scrolls sideways.
Asserted in the captured DOM — Unit sizes
What is not in the picture
No save was run, so no unit was written. Several of stage's TEST buildings carry the same fixture homes, which is why their lists repeat. The write's only-fill-a-blank condition and the per-unit outcomes are pinned by tests.