The Dashboard's Maintenance cards follow each building's own switch
Maintenance and Turnovers hide only when every selected building has Maintenance off, exactly like the rail
26 Sept 2026 · branch bldg-module-dashboard-card · captured against propflow-stage · at cba0e76d43+local
Data note. Every name and balance below comes from propflow-stage, which is anonymized by construction (ADR-0097/0110 — phones in the impossible +1000 NPA, emails @example.test). The identical capture against prod would carry real tenants' names and balances and is not safe to attach anywhere, which is why the generator refuses to run against one.
1 · Only the Maintenance-off building picked: no Maintenance or Turnovers card
Maintenance OFF at this building only; company ON. The Maintenance and Turnovers cards are gone, as are the rail's Maintenance and Vendors tabs. Figures are mid-load; the point is which cards exist.
Asserted in the captured DOM — Roan O'Connor · renewal rate · total past due
2 · Its sister building picked: both cards are back
The sister building inherits the company's ON: both cards are back.
Asserted in the captured DOM — Camellia Alexis · open work orders · move-out notices
3 · All buildings: shown
All buildings: one has it on, so both cards show.
Asserted in the captured DOM — All Properties · open work orders · move-out notices
How this was staged
Stage only, as the non-staff evidence identity. The row was set with scripts/set-building-module.ts and cleared after.