Maintenance: no auto-approve limit set reads as empty, not $500
p00-build-defaults-layer, removing the 500 auto-approve fallback. TEST company only, branch's own dev server against stage, captured as the smoke user (the customer-admin evidence identity has no access to the TEST company).
2 Oct 2026 · branch p00bdl-no-500-auto-approve · captured against propflow-stage · at cac71f4983d
Data note. Every name and balance below comes from propflow-stage, which is anonymized by construction (ADR-0097/0110 — phones in the impossible +1000 NPA, emails @example.test). The identical capture against prod would carry real tenants' names and balances and is not safe to attach anywhere, which is why the generator refuses to run against one.
1 · A building with no limit of its own
Before this change the box showed $500 for a building that had never set a limit. That number was PropFlow's, not the building's, and the spending ruling says PropFlow does not get to choose it. Now the box is empty. The two sentences under it are unchanged: in-house jobs go out immediately, and an outside vendor's quote is held for review unless it is under a limit the building set. Typing a number sets that limit.
Asserted in the captured DOM — Auto-approve external vendors under · Above it, you get a notification to review.
Sections 2–2
2 · Phone width (390px)
At 390px the card stacks under the grid. The box is still empty.
Asserted in the captured DOM — Auto-approve external vendors under
